<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema targetNamespace="http://java.sun.com/xml/ns/javaee"
            xmlns:javaee="http://java.sun.com/xml/ns/javaee"
            xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            elementFormDefault="qualified"
            attributeFormDefault="unqualified"
            version="6">
  <xsd:annotation>
    <xsd:documentation>

      DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
      
      Copyright 2003-2009 Sun Microsystems, Inc. All rights reserved.
      
      The contents of this file are subject to the terms of either the
      GNU General Public License Version 2 only ("GPL") or the Common
      Development and Distribution License("CDDL") (collectively, the
      "License").  You may not use this file except in compliance with
      the License. You can obtain a copy of the License at
      https://glassfish.dev.java.net/public/CDDL+GPL.html or
      glassfish/bootstrap/legal/LICENSE.txt.  See the License for the
      specific language governing permissions and limitations under the
      License.
      
      When distributing the software, include this License Header
      Notice in each file and include the License file at
      glassfish/bootstrap/legal/LICENSE.txt.  Sun designates this
      particular file as subject to the "Classpath" exception as
      provided by Sun in the GPL Version 2 section of the License file
      that accompanied this code.  If applicable, add the following
      below the License Header, with the fields enclosed by brackets []
      replaced by your own identifying information:
      "Portions Copyrighted [year] [name of copyright owner]"
      
      Contributor(s):
      
      If you wish your version of this file to be governed by only the
      CDDL or only the GPL Version 2, indicate your decision by adding
      "[Contributor] elects to include this software in this
      distribution under the [CDDL or GPL Version 2] license."  If you
      don't indicate a single choice of license, a recipient has the
      option to distribute your version of this file under either the
      CDDL, the GPL Version 2 or to extend the choice of license to its
      licensees as provided above.  However, if you add GPL Version 2
      code and therefore, elected the GPL Version 2 license, then the
      option applies only if the new code is made subject to such
      option by the copyright holder.
      
    </xsd:documentation>
  </xsd:annotation>

  <xsd:annotation>
    <xsd:documentation>

      The following definitions that appear in the common
      shareable schema(s) of Java EE deployment descriptors should be
      interpreted with respect to the context they are included:
      
      Deployment Component may indicate one of the following:
      java ee application;
      application client;
      web application;
      enterprise bean;
      resource adapter; 
      
      Deployment File may indicate one of the following:
      ear file;
      war file;
      jar file;
      rar file;
      
    </xsd:documentation>
  </xsd:annotation>

  <xsd:import namespace="http://www.w3.org/XML/1998/namespace"
              schemaLocation="xml.xsd"/>

  <xsd:group name="descriptionGroup">
    <xsd:annotation>
      <xsd:documentation>

        This group keeps the usage of the contained description related
        elements consistent across Java EE deployment descriptors.
        
        All elements may occur multiple times with different languages,
        to support localization of the content.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="display-name"
                   type="javaee:display-nameType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="icon"
                   type="javaee:iconType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:group>

  <xsd:group name="jndiEnvironmentRefsGroup">
    <xsd:annotation>
      <xsd:documentation>

        This group keeps the usage of the contained JNDI environment
        reference elements consistent across Java EE deployment descriptors.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="env-entry"
                   type="javaee:env-entryType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="ejb-ref"
                   type="javaee:ejb-refType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="ejb-local-ref"
                   type="javaee:ejb-local-refType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="resource-ref"
                   type="javaee:resource-refType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="resource-env-ref"
                   type="javaee:resource-env-refType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="message-destination-ref"
                   type="javaee:message-destination-refType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="persistence-context-ref"
                   type="javaee:persistence-context-refType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="persistence-unit-ref"
                   type="javaee:persistence-unit-refType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="post-construct"
                   type="javaee:lifecycle-callbackType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="pre-destroy"
                   type="javaee:lifecycle-callbackType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="data-source"
                   type="javaee:data-sourceType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:group>

  <xsd:group name="resourceGroup">
    <xsd:annotation>
      <xsd:documentation>

        This group collects elements that are common to most
        JNDI resource elements.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:group ref="javaee:resourceBaseGroup"/>
      <xsd:element name="lookup-name"
                   type="javaee:xsdStringType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The JNDI name to be looked up to resolve a resource reference.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
  </xsd:group>

  <xsd:group name="resourceBaseGroup">
    <xsd:annotation>
      <xsd:documentation>

        This group collects elements that are common to all the
        JNDI resource elements. It does not include the lookup-name
        element, that is only applicable to some resource elements.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="mapped-name"
                   type="javaee:xsdStringType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            A product specific name that this resource should be
            mapped to.  The name of this resource, as defined by the
            resource's name element or defaulted, is a name that is
            local to the application component using the resource.
            (It's a name in the JNDI java:comp/env namespace.)  Many
            application servers provide a way to map these local
            names to names of resources known to the application
            server.  This mapped name is often a global JNDI name,
            but may be a name of any form.
            
            Application servers are not required to support any
            particular form or type of mapped name, nor the ability
            to use mapped names.  The mapped name is
            product-dependent and often installation-dependent.  No
            use of a mapped name is portable.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="injection-target"
                   type="javaee:injection-targetType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:group>


<!-- **************************************************** -->

  <xsd:complexType name="data-sourceType">
    <xsd:annotation>
      <xsd:documentation>

        Configuration of a DataSource.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            Description of this DataSource.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="name"
                   type="javaee:jndi-nameType">
        <xsd:annotation>
          <xsd:documentation>

            The name element specifies the JNDI name of the
            data source being defined.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="class-name"
                   type="javaee:fully-qualified-classType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            DataSource, XADataSource or ConnectionPoolDataSource
            implementation class.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="server-name"
                   type="javaee:string"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            Database server name.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="port-number"
                   type="javaee:xsdIntegerType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            Port number where a server is listening for requests.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="database-name"
                   type="javaee:string"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            Name of a database on a server.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="url"
                   type="javaee:jdbc-urlType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            A JDBC URL. If the <code>url</code> property is specified
            along with other standard <code>DataSource</code> properties
            such as <code>serverName</code>, <code>databaseName</code>
            and <code>portNumber</code>, the more specific properties will
            take precedence and <code>url</code> will be ignored.
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="user"
                   type="javaee:string"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            User name to use for connection authentication.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="password"
                   type="javaee:string"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            Password to use for connection authentication.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="property"
                   type="javaee:propertyType"
                   minOccurs="0"
                   maxOccurs="unbounded">
        <xsd:annotation>
          <xsd:documentation>

            JDBC DataSource property.  This may be a vendor-specific
            property or a less commonly used DataSource property.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="login-timeout"
                   type="javaee:xsdIntegerType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            Sets the maximum time in seconds that this data source
            will wait while attempting to connect to a database.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="transactional"
                   type="javaee:xsdBooleanType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            Set to false if connections should not participate in
            transactions.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="isolation-level"
                   type="javaee:isolation-levelType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            Isolation level for connections.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="initial-pool-size"
                   type="javaee:xsdIntegerType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            Number of connections that should be created when a
            connection pool is initialized.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="max-pool-size"
                   type="javaee:xsdIntegerType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            Maximum number of connections that should be concurrently
            allocated for a connection pool.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="min-pool-size"
                   type="javaee:xsdIntegerType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            Minimum number of connections that should be concurrently
            allocated for a connection pool.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="max-idle-time"
                   type="javaee:xsdIntegerType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The number of seconds that a physical connection should
            remain unused in the pool before the connection is
            closed for a connection pool.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="max-statements"
                   type="javaee:xsdIntegerType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The total number of statements that a connection pool
            should keep open.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="descriptionType">
    <xsd:annotation>
      <xsd:documentation>

        The description type is used by a description element to
        provide text describing the parent element.  The elements
        that use this type should include any information that the
        Deployment Component's Deployment File file producer wants
        to provide to the consumer of the Deployment Component's
        Deployment File (i.e., to the Deployer). Typically, the
        tools used by such a Deployment File consumer will display
        the description when processing the parent element that
        contains the description.
        
        The lang attribute defines the language that the
        description is provided in. The default value is "en" (English). 
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="javaee:xsdStringType">
        <xsd:attribute ref="xml:lang"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>

  <xsd:simpleType name="dewey-versionType">
    <xsd:annotation>
      <xsd:documentation>

        This type defines a dewey decimal that is used
        to describe versions of documents. 
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:restriction base="xsd:token">
      <xsd:pattern value="\.?[0-9]+(\.[0-9]+)*"/>
    </xsd:restriction>
  </xsd:simpleType>


<!-- **************************************************** -->

  <xsd:complexType name="display-nameType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The display-name type contains a short name that is intended
        to be displayed by tools. It is used by display-name
        elements.  The display name need not be unique.
        
        Example: 
        
        ...
        <display-name xml:lang="en">
        Employee Self Service
        </display-name>
        
        The value of the xml:lang attribute is "en" (English) by default. 
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="javaee:string">
        <xsd:attribute ref="xml:lang"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="ejb-linkType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The ejb-linkType is used by ejb-link
        elements in the ejb-ref or ejb-local-ref elements to specify
        that an EJB reference is linked to enterprise bean.
        
        The value of the ejb-link element must be the ejb-name of an
        enterprise bean in the same ejb-jar file or in another ejb-jar
        file in the same Java EE application unit. 
        
        Alternatively, the name in the ejb-link element may be
        composed of a path name specifying the ejb-jar containing the
        referenced enterprise bean with the ejb-name of the target
        bean appended and separated from the path name by "#".  The
        path name is relative to the Deployment File containing
        Deployment Component that is referencing the enterprise
        bean.  This allows multiple enterprise beans with the same
        ejb-name to be uniquely identified.
        
        Examples:
        
        <ejb-link>EmployeeRecord</ejb-link>
        
        <ejb-link>../products/product.jar#ProductEJB</ejb-link>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="ejb-local-refType">
    <xsd:annotation>
      <xsd:documentation>

        The ejb-local-refType is used by ejb-local-ref elements for
        the declaration of a reference to an enterprise bean's local
        home or to the local business interface of a 3.0 bean.
        The declaration consists of:
        
        - an optional description
        - the EJB reference name used in the code of the Deployment 
        Component that's referencing the enterprise bean.
        - the optional expected type of the referenced enterprise bean
        - the optional expected local interface of the referenced 
        enterprise bean or the local business interface of the 
        referenced enterprise bean.
        - the optional expected local home interface of the referenced 
        enterprise bean. Not applicable if this ejb-local-ref refers
        to the local business interface of a 3.0 bean.
        - optional ejb-link information, used to specify the 
        referenced enterprise bean
        - optional elements to define injection of the named enterprise  
        bean into a component field or property.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="ejb-ref-name"
                   type="javaee:ejb-ref-nameType"/>
      <xsd:element name="ejb-ref-type"
                   type="javaee:ejb-ref-typeType"
                   minOccurs="0"/>
      <xsd:element name="local-home"
                   type="javaee:local-homeType"
                   minOccurs="0"/>
      <xsd:element name="local"
                   type="javaee:localType"
                   minOccurs="0"/>
      <xsd:element name="ejb-link"
                   type="javaee:ejb-linkType"
                   minOccurs="0"/>
      <xsd:group ref="javaee:resourceGroup"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="ejb-ref-nameType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The ejb-ref-name element contains the name of an EJB
        reference. The EJB reference is an entry in the
        Deployment Component's environment and is relative to the
        java:comp/env context.  The name must be unique within the
        Deployment Component.
        
        It is recommended that name is prefixed with "ejb/".
        
        Example:
        
        <ejb-ref-name>ejb/Payroll</ejb-ref-name>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:jndi-nameType"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="ejb-refType">
    <xsd:annotation>
      <xsd:documentation>

        The ejb-refType is used by ejb-ref elements for the
        declaration of a reference to an enterprise bean's home or
        to the remote business interface of a 3.0 bean.  
        The declaration consists of:
        
        - an optional description
        - the EJB reference name used in the code of
        the Deployment Component that's referencing the enterprise
        bean. 
        - the optional expected type of the referenced enterprise bean
        - the optional remote interface of the referenced enterprise bean
        or the remote business interface of the referenced enterprise 
        bean
        - the optional expected home interface of the referenced 
        enterprise bean.  Not applicable if this ejb-ref
        refers to the remote business interface of a 3.0 bean.
        - optional ejb-link information, used to specify the
        referenced enterprise bean
        - optional elements to define injection of the named enterprise
        bean into a component field or property
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="ejb-ref-name"
                   type="javaee:ejb-ref-nameType"/>
      <xsd:element name="ejb-ref-type"
                   type="javaee:ejb-ref-typeType"
                   minOccurs="0"/>
      <xsd:element name="home"
                   type="javaee:homeType"
                   minOccurs="0"/>
      <xsd:element name="remote"
                   type="javaee:remoteType"
                   minOccurs="0"/>
      <xsd:element name="ejb-link"
                   type="javaee:ejb-linkType"
                   minOccurs="0"/>
      <xsd:group ref="javaee:resourceGroup"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="ejb-ref-typeType">
    <xsd:annotation>
      <xsd:documentation>

        The ejb-ref-typeType contains the expected type of the
        referenced enterprise bean.
        
        The ejb-ref-type designates a value
        that must be one of the following:
        
        Entity
        Session
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="Entity"/>
        <xsd:enumeration value="Session"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="emptyType">
    <xsd:annotation>
      <xsd:documentation>

        This type is used to designate an empty
        element when used. 
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="env-entryType">
    <xsd:annotation>
      <xsd:documentation>

        The env-entryType is used to declare an application's
        environment entry. The declaration consists of an optional
        description, the name of the environment entry, a type
        (optional if the value is injected, otherwise required), and
        an optional value.
        
        It also includes optional elements to define injection of
        the named resource into fields or JavaBeans properties.
        
        If a value is not specified and injection is requested,
        no injection will occur and no entry of the specified name
        will be created.  This allows an initial value to be
        specified in the source code without being incorrectly
        changed when no override has been specified.
        
        If a value is not specified and no injection is requested,
        a value must be supplied during deployment. 
        
        This type is used by env-entry elements.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="env-entry-name"
                   type="javaee:jndi-nameType">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The env-entry-name element contains the name of a
            Deployment Component's environment entry.  The name
            is a JNDI name relative to the java:comp/env
            context.  The name must be unique within a 
            Deployment Component. The uniqueness
            constraints must be defined within the declared
            context.
            
            Example:
            
            <env-entry-name>minAmount</env-entry-name>
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="env-entry-type"
                   type="javaee:env-entry-type-valuesType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The env-entry-type element contains the Java language
            type of the environment entry.  If an injection target
            is specified for the environment entry, the type may
            be omitted, or must match the type of the injection
            target.  If no injection target is specified, the type
            is required.
            
            Example:
            
            <env-entry-type>java.lang.Integer</env-entry-type>
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="env-entry-value"
                   type="javaee:xsdStringType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The env-entry-value designates the value of a
            Deployment Component's environment entry. The value
            must be a String that is valid for the
            constructor of the specified type that takes a
            single String parameter, or for java.lang.Character,
            a single character.
            
            Example:
            
            <env-entry-value>100.00</env-entry-value>
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:group ref="javaee:resourceGroup"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="env-entry-type-valuesType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        This type contains the fully-qualified Java type of the
        environment entry value that is expected by the
        application's code.
        
        The following are the legal values of env-entry-type-valuesType:
        
        java.lang.Boolean
        java.lang.Byte
        java.lang.Character
        java.lang.String
        java.lang.Short
        java.lang.Integer
        java.lang.Long
        java.lang.Float
        java.lang.Double
        		  java.lang.Class
        		  any enumeration type (i.e. a subclass of java.lang.Enum)
        
        Examples:
        
        <env-entry-type>java.lang.Boolean</env-entry-type>
        <env-entry-type>java.lang.Class</env-entry-type>
        <env-entry-type>com.example.Color</env-entry-type>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:fully-qualified-classType"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="fully-qualified-classType">
    <xsd:annotation>
      <xsd:documentation>

        The elements that use this type designate the name of a
        Java class or interface.  The name is in the form of a
        "binary name", as defined in the JLS.  This is the form
        of name used in Class.forName().  Tools that need the
        canonical name (the name used in source code) will need
        to convert this binary name to the canonical name.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="generic-booleanType">
    <xsd:annotation>
      <xsd:documentation>

        This type defines four different values which can designate
        boolean values. This includes values yes and no which are 
        not designated by xsd:boolean
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="true"/>
        <xsd:enumeration value="false"/>
        <xsd:enumeration value="yes"/>
        <xsd:enumeration value="no"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="iconType">
    <xsd:annotation>
      <xsd:documentation>

        The icon type contains small-icon and large-icon elements
        that specify the file names for small and large GIF, JPEG,
        or PNG icon images used to represent the parent element in a
        GUI tool. 
        
        The xml:lang attribute defines the language that the
        icon file names are provided in. Its value is "en" (English)
        by default. 
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="small-icon"
                   type="javaee:pathType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The small-icon element contains the name of a file
            containing a small (16 x 16) icon image. The file
            name is a relative path within the Deployment
            Component's Deployment File.
            
            The image may be in the GIF, JPEG, or PNG format.
            The icon can be used by tools.
            
            Example:
            
            <small-icon>employee-service-icon16x16.jpg</small-icon>
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="large-icon"
                   type="javaee:pathType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The large-icon element contains the name of a file
            containing a large
            (32 x 32) icon image. The file name is a relative 
            path within the Deployment Component's Deployment
            File.
            
            The image may be in the GIF, JPEG, or PNG format.
            The icon can be used by tools.
            
            Example:
            
            <large-icon>employee-service-icon32x32.jpg</large-icon>
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute ref="xml:lang"/>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="injection-targetType">
    <xsd:annotation>
      <xsd:documentation>

        An injection target specifies a class and a name within
        that class into which a resource should be injected.
        
        The injection target class specifies the fully qualified
        class name that is the target of the injection.  The
        Java EE specifications describe which classes can be an
        injection target.
        
        The injection target name specifies the target within
        the specified class.  The target is first looked for as a
        JavaBeans property name.  If not found, the target is
        looked for as a field name.
        
        The specified resource will be injected into the target
        during initialization of the class by either calling the
        set method for the target property or by setting a value
        into the named field.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="injection-target-class"
                   type="javaee:fully-qualified-classType"/>
      <xsd:element name="injection-target-name"
                   type="javaee:java-identifierType"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:simpleType name="isolation-levelType">
    <xsd:annotation>
      <xsd:documentation>

        	The following transaction isolation levels are allowed
        	(see documentation for the java.sql.Connection interface):
        TRANSACTION_READ_UNCOMMITTED
        TRANSACTION_READ_COMMITTED
        TRANSACTION_REPEATABLE_READ
        TRANSACTION_SERIALIZABLE
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:restriction base="xsd:string">
      <xsd:enumeration value="TRANSACTION_READ_UNCOMMITTED"/>
      <xsd:enumeration value="TRANSACTION_READ_COMMITTED"/>
      <xsd:enumeration value="TRANSACTION_REPEATABLE_READ"/>
      <xsd:enumeration value="TRANSACTION_SERIALIZABLE"/>
    </xsd:restriction>
  </xsd:simpleType>


<!-- **************************************************** -->

  <xsd:complexType name="java-identifierType">
    <xsd:annotation>
      <xsd:documentation>

        The java-identifierType defines a Java identifier.
        The users of this type should further verify that 
        the content does not contain Java reserved keywords.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:pattern value="($|_|\p{L})(\p{L}|\p{Nd}|_|$)*"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="java-typeType">
    <xsd:annotation>
      <xsd:documentation>

        This is a generic type that designates a Java primitive
        type or a fully qualified name of a Java interface/type,
        or an array of such types.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:pattern value="[^\p{Z}]*"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="jdbc-urlType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The jdbc-urlType contains the url pattern of the mapping.
        It must follow the rules specified in Section 9.3 of the
        JDBC Specification where the format is:
        
        jdbc:<subprotocol>:<subname>
        
        Example:
        
        <url>jdbc:mysql://localhost:3307/testdb</url>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:pattern value="jdbc:(.*):(.*)"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="jndi-nameType">
    <xsd:annotation>
      <xsd:documentation>

        The jndi-nameType type designates a JNDI name in the
        Deployment Component's environment and is relative to the
        java:comp/env context.  A JNDI name must be unique within the
        Deployment Component.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="homeType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The homeType defines the fully-qualified name of
        an enterprise bean's home interface. 
        
        Example:
        
        <home>com.aardvark.payroll.PayrollHome</home>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:fully-qualified-classType"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="lifecycle-callbackType">
    <xsd:annotation>
      <xsd:documentation>

        The lifecycle-callback type specifies a method on a
        class to be called when a lifecycle event occurs.
        Note that each class may have only one lifecycle callback
        method for any given event and that the method may not
        be overloaded.
        
        If the lifefycle-callback-class element is missing then
        the class defining the callback is assumed to be the
        component class in scope at the place in the descriptor
        in which the callback definition appears.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="lifecycle-callback-class"
                   type="javaee:fully-qualified-classType"
                   minOccurs="0"/>
      <xsd:element name="lifecycle-callback-method"
                   type="javaee:java-identifierType"/>
    </xsd:sequence>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="listenerType">
    <xsd:annotation>
      <xsd:documentation>

        The listenerType indicates the deployment properties for a web
        application listener bean.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:group ref="javaee:descriptionGroup"/>
      <xsd:element name="listener-class"
                   type="javaee:fully-qualified-classType">
        <xsd:annotation>
          <xsd:documentation>

            The listener-class element declares a class in the
            application must be registered as a web
            application listener bean. The value is the fully
            qualified classname of the listener class.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="localType">
    <xsd:annotation>
      <xsd:documentation>

        The localType defines the fully-qualified name of an
        enterprise bean's local interface.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:fully-qualified-classType"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="local-homeType">
    <xsd:annotation>
      <xsd:documentation>

        The local-homeType defines the fully-qualified
        name of an enterprise bean's local home interface.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:fully-qualified-classType"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="param-valueType">
    <xsd:annotation>
      <xsd:documentation>

        This type is a general type that can be used to declare
        parameter/value lists.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="param-name"
                   type="javaee:string">
        <xsd:annotation>
          <xsd:documentation>

            The param-name element contains the name of a
            parameter.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="param-value"
                   type="javaee:xsdStringType">
        <xsd:annotation>
          <xsd:documentation>

            The param-value element contains the value of a
            parameter.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="pathType">
    <xsd:annotation>
      <xsd:documentation>

        The elements that use this type designate either a relative
        path or an absolute path starting with a "/".
        
        In elements that specify a pathname to a file within the
        same Deployment File, relative filenames (i.e., those not
        starting with "/") are considered relative to the root of
        the Deployment File's namespace.  Absolute filenames (i.e.,
        those starting with "/") also specify names in the root of
        the Deployment File's namespace.  In general, relative names
        are preferred.  The exception is .war files where absolute
        names are preferred for consistency with the Servlet API.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="persistence-context-refType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The persistence-context-ref element contains a declaration
        of Deployment Component's reference to a persistence context
        associated within a Deployment Component's
        environment. It consists of:
        
        - an optional description
        - the persistence context reference name
        - an optional persistence unit name.  If not specified,
        the default persistence unit is assumed.
        - an optional specification as to whether
        the persistence context type is Transaction or
        Extended.  If not specified, Transaction is assumed.
        - an optional list of persistence properties
        - optional injection targets
        
        Examples:
        
        <persistence-context-ref>
        <persistence-context-ref-name>myPersistenceContext
        </persistence-context-ref-name>
        </persistence-context-ref>
        
        <persistence-context-ref>
        <persistence-context-ref-name>myPersistenceContext
        </persistence-context-ref-name>
        <persistence-unit-name>PersistenceUnit1
        </persistence-unit-name>
        <persistence-context-type>Extended</persistence-context-type>
        </persistence-context-ref>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="persistence-context-ref-name"
                   type="javaee:jndi-nameType">
        <xsd:annotation>
          <xsd:documentation>

            The persistence-context-ref-name element specifies
            the name of a persistence context reference; its
            value is the environment entry name used in
            Deployment Component code.  The name is a JNDI name
            relative to the java:comp/env context.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="persistence-unit-name"
                   type="javaee:string"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The Application Assembler(or BeanProvider) may use the
            following syntax to avoid the need to rename persistence
            units to have unique names within a Java EE application.
            
            The Application Assembler specifies the pathname of the
            root of the persistence.xml file for the referenced
            persistence unit and appends the name of the persistence
            unit separated from the pathname by #. The pathname is
            relative to the referencing application component jar file. 
            In this manner, multiple persistence units with the same
            persistence unit name may be uniquely identified when the 
            Application Assembler cannot change persistence unit names.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="persistence-context-type"
                   type="javaee:persistence-context-typeType"
                   minOccurs="0"/>
      <xsd:element name="persistence-property"
                   type="javaee:propertyType"
                   minOccurs="0"
                   maxOccurs="unbounded">
        <xsd:annotation>
          <xsd:documentation>

            Used to specify properties for the container or persistence
            provider.  Vendor-specific properties may be included in
            the set of properties.  Properties that are not recognized
            by a vendor must be ignored.  Entries that make use of the 
            namespace javax.persistence and its subnamespaces must not
            be used for vendor-specific properties.  The namespace
            javax.persistence is reserved for use by the specification.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:group ref="javaee:resourceBaseGroup"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="persistence-context-typeType">
    <xsd:annotation>
      <xsd:documentation>

        The persistence-context-typeType specifies the transactional
        nature of a persistence context reference.  
        
        The value of the persistence-context-type element must be
        one of the following:
        Transaction
        Extended
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="Transaction"/>
        <xsd:enumeration value="Extended"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="propertyType">
    <xsd:annotation>
      <xsd:documentation>

        Specifies a name/value pair.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="name"
                   type="javaee:xsdStringType">
      </xsd:element>
      <xsd:element name="value"
                   type="javaee:xsdStringType">
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="persistence-unit-refType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The persistence-unit-ref element contains a declaration
        of Deployment Component's reference to a persistence unit
        associated within a Deployment Component's
        environment. It consists of:
        
        - an optional description
        - the persistence unit reference name
        - an optional persistence unit name.  If not specified,
        the default persistence unit is assumed.
        - optional injection targets
        
        Examples:
        
        <persistence-unit-ref>
        <persistence-unit-ref-name>myPersistenceUnit
        </persistence-unit-ref-name>
        </persistence-unit-ref>
        
        <persistence-unit-ref>
        <persistence-unit-ref-name>myPersistenceUnit
        </persistence-unit-ref-name>
        <persistence-unit-name>PersistenceUnit1
        </persistence-unit-name>
        </persistence-unit-ref>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="persistence-unit-ref-name"
                   type="javaee:jndi-nameType">
        <xsd:annotation>
          <xsd:documentation>

            The persistence-unit-ref-name element specifies
            the name of a persistence unit reference; its
            value is the environment entry name used in
            Deployment Component code.  The name is a JNDI name
            relative to the java:comp/env context.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="persistence-unit-name"
                   type="javaee:string"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The Application Assembler(or BeanProvider) may use the
            following syntax to avoid the need to rename persistence
            units to have unique names within a Java EE application.
            
            The Application Assembler specifies the pathname of the
            root of the persistence.xml file for the referenced
            persistence unit and appends the name of the persistence
            unit separated from the pathname by #. The pathname is
            relative to the referencing application component jar file. 
            In this manner, multiple persistence units with the same
            persistence unit name may be uniquely identified when the 
            Application Assembler cannot change persistence unit names.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:group ref="javaee:resourceBaseGroup"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="remoteType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The remote element contains the fully-qualified name
        of the enterprise bean's remote interface.
        
        Example:
        
        <remote>com.wombat.empl.EmployeeService</remote>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:fully-qualified-classType"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="resource-env-refType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The resource-env-refType is used to define
        resource-env-ref elements.  It contains a declaration of a
        Deployment Component's reference to an administered object
        associated with a resource in the Deployment Component's
        environment.  It consists of an optional description, the
        resource environment reference name, and an optional
        indication of the resource environment reference type
        expected by the Deployment Component code.
        
        It also includes optional elements to define injection of
        the named resource into fields or JavaBeans properties.
        
        The resource environment type must be supplied unless an
        injection target is specified, in which case the type
        of the target is used.  If both are specified, the type
        must be assignment compatible with the type of the injection
        target.
        
        Example:
        
        <resource-env-ref>
        <resource-env-ref-name>jms/StockQueue
        </resource-env-ref-name>
        <resource-env-ref-type>javax.jms.Queue
        </resource-env-ref-type>
        </resource-env-ref>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="resource-env-ref-name"
                   type="javaee:jndi-nameType">
        <xsd:annotation>
          <xsd:documentation>

            The resource-env-ref-name element specifies the name
            of a resource environment reference; its value is
            the environment entry name used in
            the Deployment Component code.  The name is a JNDI 
            name relative to the java:comp/env context and must 
            be unique within a Deployment Component.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="resource-env-ref-type"
                   type="javaee:fully-qualified-classType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The resource-env-ref-type element specifies the type
            of a resource environment reference.  It is the
            fully qualified name of a Java language class or
            interface.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:group ref="javaee:resourceGroup"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="resource-refType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The resource-refType contains a declaration of a
        Deployment Component's reference to an external resource. It
        consists of an optional description, the resource manager
        connection factory reference name, an optional indication of
        the resource manager connection factory type expected by the
        Deployment Component code, an optional type of authentication
        (Application or Container), and an optional specification of
        the shareability of connections obtained from the resource
        (Shareable or Unshareable).
        
        It also includes optional elements to define injection of
        the named resource into fields or JavaBeans properties.
        
        The connection factory type must be supplied unless an
        injection target is specified, in which case the type
        of the target is used.  If both are specified, the type
        must be assignment compatible with the type of the injection
        target.
        
        Example:
        
        <resource-ref>
        <res-ref-name>jdbc/EmployeeAppDB</res-ref-name>
        <res-type>javax.sql.DataSource</res-type>
        <res-auth>Container</res-auth>
        <res-sharing-scope>Shareable</res-sharing-scope>
        </resource-ref>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="res-ref-name"
                   type="javaee:jndi-nameType">
        <xsd:annotation>
          <xsd:documentation>

            The res-ref-name element specifies the name of a
            resource manager connection factory reference.
            The name is a JNDI name relative to the
            java:comp/env context.  
            The name must be unique within a Deployment File. 
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="res-type"
                   type="javaee:fully-qualified-classType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The res-type element specifies the type of the data
            source. The type is specified by the fully qualified
            Java language class or interface
            expected to be implemented by the data source.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="res-auth"
                   type="javaee:res-authType"
                   minOccurs="0"/>
      <xsd:element name="res-sharing-scope"
                   type="javaee:res-sharing-scopeType"
                   minOccurs="0"/>
      <xsd:group ref="javaee:resourceGroup"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="res-authType">
    <xsd:annotation>
      <xsd:documentation>

        The res-authType specifies whether the Deployment Component
        code signs on programmatically to the resource manager, or
        whether the Container will sign on to the resource manager
        on behalf of the Deployment Component. In the latter case,
        the Container uses information that is supplied by the
        Deployer.
        
        The value must be one of the two following:
        
        Application
        Container
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="Application"/>
        <xsd:enumeration value="Container"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="res-sharing-scopeType">
    <xsd:annotation>
      <xsd:documentation>

        The res-sharing-scope type specifies whether connections
        obtained through the given resource manager connection
        factory reference can be shared. The value, if specified,
        must be one of the two following:
        
        Shareable
        Unshareable
        
        The default value is Shareable.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="Shareable"/>
        <xsd:enumeration value="Unshareable"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="run-asType">
    <xsd:annotation>
      <xsd:documentation>

        The run-asType specifies the run-as identity to be
        used for the execution of a component. It contains an 
        optional description, and the name of a security role.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="role-name"
                   type="javaee:role-nameType"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="role-nameType">
    <xsd:annotation>
      <xsd:documentation>

        The role-nameType designates the name of a security role.
        
        The name must conform to the lexical rules for a token.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="security-roleType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The security-roleType contains the definition of a security
        role. The definition consists of an optional description of
        the security role, and the security role name.
        
        Example:
        
        <security-role>
        <description>
        This role includes all employees who are authorized
        to access the employee service application.
        </description>
        <role-name>employee</role-name>
        </security-role>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="role-name"
                   type="javaee:role-nameType"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="security-role-refType">
    <xsd:annotation>
      <xsd:documentation>

        The security-role-refType contains the declaration of a
        security role reference in a component's or a
        Deployment Component's code. The declaration consists of an
        optional description, the security role name used in the
        code, and an optional link to a security role. If the
        security role is not specified, the Deployer must choose an
        appropriate security role.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="role-name"
                   type="javaee:role-nameType">
        <xsd:annotation>
          <xsd:documentation>

            The value of the role-name element must be the String used
            as the parameter to the 
            EJBContext.isCallerInRole(String roleName) method or the
            HttpServletRequest.isUserInRole(String role) method.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="role-link"
                   type="javaee:role-nameType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The role-link element is a reference to a defined
            security role. The role-link element must contain
            the name of one of the security roles defined in the
            security-role elements.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="xsdQNameType">
    <xsd:annotation>
      <xsd:documentation>

        This type adds an "id" attribute to xsd:QName.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:QName">
        <xsd:attribute name="id"
                       type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="xsdBooleanType">
    <xsd:annotation>
      <xsd:documentation>

        This type adds an "id" attribute to xsd:boolean.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:boolean">
        <xsd:attribute name="id"
                       type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="xsdNMTOKENType">
    <xsd:annotation>
      <xsd:documentation>

        This type adds an "id" attribute to xsd:NMTOKEN.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:NMTOKEN">
        <xsd:attribute name="id"
                       type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="xsdAnyURIType">
    <xsd:annotation>
      <xsd:documentation>

        This type adds an "id" attribute to xsd:anyURI.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:anyURI">
        <xsd:attribute name="id"
                       type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="xsdIntegerType">
    <xsd:annotation>
      <xsd:documentation>

        This type adds an "id" attribute to xsd:integer.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:integer">
        <xsd:attribute name="id"
                       type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="xsdPositiveIntegerType">
    <xsd:annotation>
      <xsd:documentation>

        This type adds an "id" attribute to xsd:positiveInteger.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:positiveInteger">
        <xsd:attribute name="id"
                       type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="xsdNonNegativeIntegerType">
    <xsd:annotation>
      <xsd:documentation>

        This type adds an "id" attribute to xsd:nonNegativeInteger.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:nonNegativeInteger">
        <xsd:attribute name="id"
                       type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="xsdStringType">
    <xsd:annotation>
      <xsd:documentation>

        This type adds an "id" attribute to xsd:string.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:string">
        <xsd:attribute name="id"
                       type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="string">
    <xsd:annotation>
      <xsd:documentation>

        This is a special string datatype that is defined by Java EE as
        a base type for defining collapsed strings. When schemas
        require trailing/leading space elimination as well as
        collapsing the existing whitespace, this base type may be
        used.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:token">
        <xsd:attribute name="id"
                       type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="true-falseType">
    <xsd:annotation>
      <xsd:documentation>

        This simple type designates a boolean with only two
        permissible values
        
        - true
        - false
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:xsdBooleanType">
        <xsd:pattern value="(true|false)"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="url-patternType">
    <xsd:annotation>
      <xsd:documentation>

        The url-patternType contains the url pattern of the mapping.
        It must follow the rules specified in Section 11.2 of the
        Servlet API Specification. This pattern is assumed to be in
        URL-decoded form and must not contain CR(#xD) or LF(#xA).
        If it contains those characters, the container must inform
        the developer with a descriptive error message.
        The container must preserve all characters including whitespaces.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:string"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="message-destinationType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The message-destinationType specifies a message
        destination. The logical destination described by this
        element is mapped to a physical destination by the Deployer.
        
        The message destination element contains: 
        
        - an optional description
        - an optional display-name
        - an optional icon
        - a message destination name which must be unique
        among message destination names within the same 
        Deployment File. 
        - an optional mapped name
        - an optional lookup name
        
        Example: 
        
        <message-destination>
        <message-destination-name>CorporateStocks
        </message-destination-name>
        </message-destination>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:group ref="javaee:descriptionGroup"/>
      <xsd:element name="message-destination-name"
                   type="javaee:string">
        <xsd:annotation>
          <xsd:documentation>

            The message-destination-name element specifies a
            name for a message destination.  This name must be
            unique among the names of message destinations
            within the Deployment File.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="mapped-name"
                   type="javaee:xsdStringType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            A product specific name that this message destination
            should be mapped to.  Each message-destination-ref
            element that references this message destination will
            define a name in the namespace of the referencing
            component or in one of the other predefined namespaces. 
            Many application servers provide a way to map these
            local names to names of resources known to the
            application server.  This mapped name is often a global
            JNDI name, but may be a name of any form.  Each of the
            local names should be mapped to this same global name.
            
            Application servers are not required to support any
            particular form or type of mapped name, nor the ability
            to use mapped names.  The mapped name is
            product-dependent and often installation-dependent.  No
            use of a mapped name is portable.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="lookup-name"
                   type="javaee:xsdStringType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The JNDI name to be looked up to resolve the message destination.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="message-destination-refType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The message-destination-ref element contains a declaration
        of Deployment Component's reference to a message destination
        associated with a resource in Deployment Component's
        environment. It consists of:
        
        - an optional description
        - the message destination reference name
        - an optional message destination type
        - an optional specification as to whether
        the destination is used for 
        consuming or producing messages, or both.
        if not specified, "both" is assumed.
        - an optional link to the message destination
        - optional injection targets
        
        The message destination type must be supplied unless an
        injection target is specified, in which case the type
        of the target is used.  If both are specified, the type
        must be assignment compatible with the type of the injection
        target.
        
        Examples:
        
        <message-destination-ref>
        <message-destination-ref-name>jms/StockQueue
        </message-destination-ref-name>
        <message-destination-type>javax.jms.Queue
        </message-destination-type>
        <message-destination-usage>Consumes
        </message-destination-usage>
        <message-destination-link>CorporateStocks
        </message-destination-link>
        </message-destination-ref>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="message-destination-ref-name"
                   type="javaee:jndi-nameType">
        <xsd:annotation>
          <xsd:documentation>

            The message-destination-ref-name element specifies
            the name of a message destination reference; its
            value is the environment entry name used in
            Deployment Component code.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="message-destination-type"
                   type="javaee:message-destination-typeType"
                   minOccurs="0"/>
      <xsd:element name="message-destination-usage"
                   type="javaee:message-destination-usageType"
                   minOccurs="0"/>
      <xsd:element name="message-destination-link"
                   type="javaee:message-destination-linkType"
                   minOccurs="0"/>
      <xsd:group ref="javaee:resourceGroup"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="message-destination-usageType">
    <xsd:annotation>
      <xsd:documentation>

        The message-destination-usageType specifies the use of the
        message destination indicated by the reference.  The value
        indicates whether messages are consumed from the message
        destination, produced for the destination, or both.  The
        Assembler makes use of this information in linking producers
        of a destination with its consumers.
        
        The value of the message-destination-usage element must be
        one of the following:
        Consumes
        Produces
        ConsumesProduces
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="Consumes"/>
        <xsd:enumeration value="Produces"/>
        <xsd:enumeration value="ConsumesProduces"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="message-destination-typeType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The message-destination-typeType specifies the type of
        the destination. The type is specified by the Java interface
        expected to be implemented by the destination.
        
        Example: 
        
        <message-destination-type>javax.jms.Queue
        </message-destination-type>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:fully-qualified-classType"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="message-destination-linkType">
    <xsd:annotation>
      <xsd:documentation>

        The message-destination-linkType is used to link a message
        destination reference or message-driven bean to a message
        destination.
        
        The Assembler sets the value to reflect the flow of messages
        between producers and consumers in the application.
        
        The value must be the message-destination-name of a message
        destination in the same Deployment File or in another
        Deployment File in the same Java EE application unit.
        
        Alternatively, the value may be composed of a path name
        specifying a Deployment File containing the referenced
        message destination with the message-destination-name of the
        destination appended and separated from the path name by
        "#". The path name is relative to the Deployment File
        containing Deployment Component that is referencing the
        message destination.  This allows multiple message
        destinations with the same name to be uniquely identified.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string"/>
    </xsd:simpleContent>
  </xsd:complexType>

</xsd:schema>
