- cors configuration via hapi properties based on change request 6858c0d799 (r266027967)

- reverted mysql as default and used derby based on change request 6858c0d799 (r266028296) and updated readme to include specifics on configuring mysql
- defaulted to jetty configs on hapi.properties so that this starter app will outright work without changing any configs with mvn jetty:run
- updated subscription configs as it doesn't match already active subscription on subsequent runs using mysql as db
- updated project based path resolution and removed unused file .keep_hapi-fhir-jpaserver-starter

README.md

@@ -12,7 +12,7 @@ In order to use this sample, you should have:
 
 # Running Locally
 
-The easiest way to run this server is to run it directly in Maven using a built-in Jetty server. To do this, execute the following command:
+The easiest way to run this server is to run it directly in Maven using a built-in Jetty server. To do this, change `src/main/resources/hapi.properties` `server_address` and `server.base` with the values commented out as *For Jetty, use this* and then execute the following command:
 
 ```
 mvn jetty:run
@@ -20,7 +20,7 @@ mvn jetty:run
 
 Then, browse to the following link to use the server:
 
-[http://localhost:8080/](http://localhost:8080/)
+[http://localhost:8080/hapi-fhir-jpaserver/](http://localhost:8080/hapi-fhir-jpaserver/)
 
 # Deploying to a Container
 
@@ -40,7 +40,7 @@ This will create a file called `hapi-fhir-jpaserver.war` in your `target` direct
 
 Again, browse to the following link to use the server (note that the port 8080 may not be correct depending on how your server is configured).
 
-[http://localhost:8080/](http://localhost:8080/)
+[http://localhost:8080/hapi-fhir-jpaserver/](http://localhost:8080/hapi-fhir-jpaserver/)
 
 # Customizing The Web Testpage UI
 
@@ -56,13 +56,21 @@ Much of this HAPI starter project can be configured using the properties file in
 
 ## MySql
 
-To configure the starter app to with MySQL, use the commands below to add user and database:
+To configure the starter app to use MySQL, instead of the default Derby:
 
+> Add user and database on your mysql server via mysql cli
 ```
-CREATE USER 'fhirUser'@'localhost' IDENTIFIED BY 'fhirPass';
+CREATE USER 'hapiDbUser'@'localhost' IDENTIFIED BY 'hapiDbPass';
-CREATE DATABASE fhir_r4;
+CREATE DATABASE hapi_dstu3;
-GRANT ALL PRIVILEGES ON fhir_r4.* to 'fhirUser'@'localhost';
+GRANT ALL PRIVILEGES ON hapi_dstu3.* to 'hapiDbUser'@'localhost';
 FLUSH PRIVILEGES;
 ```
 
+> Update hapi.properties file to have the following
+* @line34 datasource.driver=com.mysql.cj.jdbc.Driver
+* @line35 datasource.url=jdbc:mysql://localhost:3306/hapi_dstu3
+* @line36 datasource.username=hapiDbUser
+* @line37 datasource.password=hapiDbPass
+* @line41 hibernate.dialect=org.hibernate.dialect.MySQL5Dialect
+
 It is important to use MySQL5Dialect when using MySQL version 5+.

pom.xml

@@ -204,7 +204,7 @@
                 <version>9.4.8.v20180619</version>
                 <configuration>
                     <webApp>
-                        <contextPath>/</contextPath>
+                        <contextPath>/hapi-fhir-jpaserver</contextPath>
                         <allowDuplicateFragmentNames>true</allowDuplicateFragmentNames>
                     </webApp>
                 </configuration>

src/main/java/ca/uhn/fhir/jpa/starter/HapiProperties.java

@@ -41,6 +41,8 @@ public class HapiProperties {
     static final String SUBSCRIPTION_WEBSOCKET_ENABLED = "subscription.websocket.enabled";
     static final String TEST_PORT = "test.port";
     static final String TESTER_CONFIG_REFUSE_TO_FETCH_THIRD_PARTY_URLS = "tester.config.refuse_to_fetch_third_party_urls";
+    static final String CORS_ENABLED = "cors.enabled";
+    static final String CORS_ALLOWED_ORIGIN = "cors.allowed_origin";
 
     private static Properties properties;
 
@@ -255,6 +257,14 @@ public class HapiProperties {
         return HapiProperties.getBooleanProperty(TESTER_CONFIG_REFUSE_TO_FETCH_THIRD_PARTY_URLS, false);
     }
 
+    public static Boolean getCorsEnabled() {
+        return HapiProperties.getBooleanProperty(CORS_ENABLED, true);
+    }
+
+    public static String getCorsAllowedOrigin() {
+        return HapiProperties.getProperty(CORS_ALLOWED_ORIGIN, "*");
+    }
+
     public static String getServerBase() {
         return HapiProperties.getProperty(SERVER_BASE, "/fhir");
     }

src/main/java/ca/uhn/fhir/jpa/starter/JpaRestfulServer.java

@@ -5,7 +5,6 @@ import ca.uhn.fhir.context.FhirVersionEnum;
 import ca.uhn.fhir.jpa.dao.DaoConfig;
 import ca.uhn.fhir.jpa.dao.IFhirSystemDao;
 import ca.uhn.fhir.jpa.model.interceptor.executor.InterceptorService;
-import ca.uhn.fhir.jpa.model.interceptor.api.IInterceptorRegistry;
 import ca.uhn.fhir.jpa.provider.JpaConformanceProviderDstu2;
 import ca.uhn.fhir.jpa.provider.JpaSystemProviderDstu2;
 import ca.uhn.fhir.jpa.provider.SubscriptionTriggeringProvider;
@@ -18,8 +17,6 @@ import ca.uhn.fhir.jpa.provider.r4.TerminologyUploaderProviderR4;
 import ca.uhn.fhir.jpa.search.DatabaseBackedPagingProvider;
 import ca.uhn.fhir.jpa.subscription.SubscriptionInterceptorLoader;
 import ca.uhn.fhir.jpa.subscription.module.interceptor.SubscriptionDebugLogInterceptor;
-import ca.uhn.fhir.jpa.subscription.SubscriptionActivatingInterceptor;
-import ca.uhn.fhir.jpa.subscription.SubscriptionMatcherInterceptor;
 import ca.uhn.fhir.model.dstu2.composite.MetaDt;
 import ca.uhn.fhir.narrative.DefaultThymeleafNarrativeGenerator;
 import ca.uhn.fhir.rest.server.HardcodedServerAddressStrategy;
@@ -175,6 +172,7 @@ public class JpaRestfulServer extends RestfulServer {
         // Define your CORS configuration. This is an example
         // showing a typical setup. You should customize this
         // to your specific needs
+        if(HapiProperties.getCorsEnabled()) {
             CorsConfiguration config = new CorsConfiguration();
             config.addAllowedHeader("x-fhir-starter");
             config.addAllowedHeader("Origin");
@@ -182,7 +180,7 @@ public class JpaRestfulServer extends RestfulServer {
             config.addAllowedHeader("X-Requested-With");
             config.addAllowedHeader("Content-Type");
 
-        config.addAllowedOrigin("*");
+            config.addAllowedOrigin(HapiProperties.getCorsAllowedOrigin());
 
             config.addExposedHeader("Location");
             config.addExposedHeader("Content-Location");
@@ -191,13 +189,13 @@ public class JpaRestfulServer extends RestfulServer {
             // Create the interceptor and register it
             CorsInterceptor interceptor = new CorsInterceptor(config);
             registerInterceptor(interceptor);
+        }
 
         // If subscriptions are enabled, we want to register the interceptor that
         // will activate them and match results against them
         if (HapiProperties.getSubscriptionWebsocketEnabled() ||
                 HapiProperties.getSubscriptionEmailEnabled() ||
                 HapiProperties.getSubscriptionRestHookEnabled()) {
-
             // Loads subscription interceptors (SubscriptionActivatingInterceptor, SubscriptionMatcherInterceptor)
             // with activation of scheduled subscription
             SubscriptionInterceptorLoader subscriptionInterceptorLoader = appCtx.getBean(SubscriptionInterceptorLoader.class);
@@ -206,7 +204,6 @@ public class JpaRestfulServer extends RestfulServer {
             // Subscription debug logging
             InterceptorService interceptorService = (InterceptorService) appCtx.getBean("interceptorService");
             interceptorService.registerInterceptor(new SubscriptionDebugLogInterceptor());
-
         }
 
     }

src/main/resources/hapi.properties

@@ -1,27 +1,29 @@
 
 # Adjust this to set the version of FHIR supported by this server. See
 # FhirVersionEnum for a list of available constants.
-fhir_version=R4
+fhir_version=DSTU3
 
 # This is the address that the FHIR server will report as its own address.
 # If this server will be deployed (for example) to an internet accessible
 # server, put the DNS name of that server here.
-server_address=http://localhost:8080/fhir/
+#server_address=http://localhost/fhir/
 
 # For Jetty, use this:
-# server_address=http://localhost:8080/hapi-fhir-jpaserver/fhir/
+server_address=http://localhost:8080/hapi-fhir-jpaserver/fhir/
 
 # This is the context path for the FHIR endpoint. If this is changed, the
 # setting above should also be changed.
-server.base=/fhir
+#server.base=/fhir
 
 # For Jetty, use this:
-# server.base=/hapi-fhir-jpaserver/fhir
+server.base=/hapi-fhir-jpaserver/fhir
 
 default_encoding=JSON
 etag_support=ENABLED
 default_page_size=20
 max_page_size=200
+allow_override_default_search_params=true
+allow_contains_searches=true
 allow_multiple_delete=true
 allow_external_references=true
 allow_placeholder_references=true
@@ -31,14 +33,14 @@ logger.name=fhirtest.access
 logger.format=Path[${servletPath}] Source[${requestHeader.x-forwarded-for}] Operation[${operationType} ${operationName} ${idOrResourceName}] UA[${requestHeader.user-agent}] Params[${requestParameters}] ResponseEncoding[${responseEncodingNoDefault}]
 logger.error_format=ERROR - ${requestVerb} ${requestUrl}
 logger.log_exceptions=true
-datasource.driver=com.mysql.cj.jdbc.Driver
+datasource.driver=org.apache.derby.jdbc.EmbeddedDriver
-datasource.url=jdbc:mysql://localhost:3306/fhir_r4
+datasource.url=jdbc:derby:directory:target/jpaserver_derby_files;create=true
-datasource.username=fhirUser
+datasource.username=
-datasource.password=fhirPass
+datasource.password=
 server.name=Local Tester
 server.id=home
 test.port=
-hibernate.dialect=org.hibernate.dialect.MySQL5Dialect
+hibernate.dialect=ca.uhn.fhir.jpa.util.DerbyTenSevenHapiFhirDialect
 hibernate.search.model_mapping=ca.uhn.fhir.jpa.search.LuceneSearchMappingFactory
 hibernate.format_sql=false
 hibernate.show_sql=false
@@ -52,7 +54,8 @@ hibernate.search.default.directory_provider=filesystem
 hibernate.search.default.indexBase=target/lucenefiles
 hibernate.search.lucene_version=LUCENE_CURRENT
 tester.config.refuse_to_fetch_third_party_urls=false
-
+cors.enabled=true
+cors.allowed_origin=*
 
 ##################################################
 # Subscriptions

src/test/java/ca/uhn/fhir/jpa/starter/ExampleServerR4IT.java

@@ -22,9 +22,9 @@ import org.junit.AfterClass;
 import org.junit.BeforeClass;
 import org.junit.Test;
 
-import java.io.File;
 import java.io.IOException;
 import java.net.URI;
+import java.nio.file.Paths;
 import java.util.concurrent.Future;
 import java.util.concurrent.TimeUnit;
 
@@ -131,13 +131,7 @@ public class ExampleServerR4IT {
 
     @BeforeClass
     public static void beforeClass() throws Exception {
-        /*
+        String path = Paths.get("").toAbsolutePath().toString();
-         * This runs under maven, and I'm not sure how else to figure out the target directory from code..
-         */
-        String path = ExampleServerR4IT.class.getClassLoader().getResource(".keep_hapi-fhir-jpaserver-starter").getPath();
-        path = new File(path).getParent();
-        path = new File(path).getParent();
-        path = new File(path).getParent();
 
         ourLog.info("Project base path is: {}", path);